Sensor And Condenser Maintenance - Scotsman FME1504 User Manual

NME1254 & FME1504

SENSOR and CONDENSER MAINTENANCE

1. The bin control is a device that senses light,
and must be kept clean enough so that they can
"see". At least twice a year, remove the bin control
sensors from the base of the ice chute, and wipe
the inside clean, as illustrated.
ICE CHUTE
SLIDE IN
AND OUT
ICE LEVEL
SENSORS
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
3. Clean or replace the air cooled condenser
filter.Clean the air cooled condenser. Use a
vacuum cleaner or coil cleaner if needed.
Do NOT use a wire brush.
June 2002
Page 16
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.