Table of Contents
Advertisement
SENSOR MAINTENANCE
1. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can "see". At least twice a year, remove the
bin control sensors from the base of the ice chute,
and wipe the inside clean, as illustrated.
SLIDE ICE LEVEL
CONTROLS OUT
OF CHUTE
CLEAN THE ICE
LEVEL CONTROL
SENSORS
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
November 2000
Page 15
Double System RL
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.
Advertisement
Table of Contents
