NME1254 & FME1504
COMPONENT DESCRIPTION
Evaporator: A refrigerated vertical tube filled
water and containing a water seal and auger.
Auger: A solid stainless steel double spiral auger,
it pushes the ice crystals up to the top of the
evaporator.
Water Seal: A two part "face" seal, the top half
rotating with the auger, the bottom half stationary,
the sealing action being where the two seal "faces"
meet.
Ice Sweep: A plastic cap with "fingers". It revolves
with the auger to "sweep" the ice into the ice chute.
Breaker: Where the ice is compressed and much
of the extra water is squeezed out of it before it is
discharged into the bin.
BREAKER
ICE CHUTE
WATER SEAL
ICE LEVEL
SENSORS
Motor: A split phase motor that drives the gear
reducer.
Bearing: As the ice is pushed up the evaporator,
the auger is thrust down, and pressure from the
auger thrust is taken up by this bearing.
ICE
SWEEP
June 2002
Page 12
BEARING
AUGER
EVAPORATOR
DRIVE MOTOR