For The Installer - Scotsman FME1504 User Manual

NME1254 & FME1504

FOR THE INSTALLER

Location
After uncrating and inspection, the unit
is ready for installation. It is important
that the machine be installed in a
location where it has enough space
around it to be accessible for service,
and minimum of 6" be allowed to the left,
right and top for air circulation on air
cooled models. Try to avoid hot, dirty
and crowded locations. Be sure that the
location for the machine is within the
limitations described on page 3.
Storage Bin
Tip the storage bin on its back, using
parts of the carton to protect the exterior
finish. Install the legs into the threaded
holes in the bottom of the bin. Turn the
leg levelers all the way in preparation for
leveling later. Return the bin to the
upright position, remove paper covering
the bin gasket.
Install bin top if required.
Note: Do not push bin into position,
instead lift it there. Pushing a bin,
especially one with ice in it, can cause
damage to the legs and the leg mounts.
Ice Machine
The machine is heavy, so the use of a
mechanical lift is recommended for
lifting the machine high enough to install
on top of the bin. After the unit is placed
on the bin, line it up so it is even with the
back, left, and right sides. Secure the
machine to the bin with the hardware
provided with the machine.
Fasten The Machine To
The Bin With The
Hardware Supplied With
The ice machine
June 2002
Page 4
Level The
Assembly
Gasket