For The Electrician - Scotsman FME1504 User Manual

NME1254 & FME1504

FOR THE ELECTRICIAN

Connect the electrical power to the power leads in
the junction box at the rear of the machine.
Check the nameplate (located on the back panel)
for the voltage requirements, and for the minimum
circuit ampacity. The machine requires a solid
chassis to earth ground wire.
Connect the ice machine to its own electrical circuit
so it is individually fused.
Voltage variation must remain within design
limitations, even under starting conditions.
Power
Supply
THIS UNIT MUST BE
GROUNDED
CONFORM TO ALL APPLICABLE CODES
All external wiring must conform to national,
state, and local electrical codes. The use of a
licensed electrician is required to perform the
electrical installation.
June 2002
Page 6
Ice Machine
Junction Box