Table of Contents
Advertisement
Figure 60. Remove the I/O board with cable
Screw specifications
M2 x L4
Step 4.
Separate the I/O board cable from the I/O board.
Figure 61. Separate the I/O board cable from the I/O board
Go to
https://support.lenovo.com/partslookup
replacement parts:
I/O board
I/O board cable
Remove the fingerprint board module
Make sure the following FRU (or CRU) have been removed.
"Remove the lower case" on page 34
"Remove the I/O board module" on page 43
"Remove the fan" on page 63
Step 1.
Disconnect the battery pack cable from the system board.
Number of screws
1
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
65
Advertisement
Table of Contents
