Remove The Battery Pack; Remove The Solid-State Drive (Ssd) Module - Lenovo S14 Gen 3 Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
part:
Lower case

Remove the battery pack

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 34
Step 1. Disconnect the battery pack cable from the system board. Remove eight screws and then remove
the battery pack.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 43. Remove the battery pack
Screw specifications
M2 x L4.5
M2 x L2.8
Go to https://support.lenovo.com/partslookup
part:
Battery pack

Remove the solid-state drive (SSD) module

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 55
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove the SSD thermal pad.
56
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
Number of screws
6
2
to look up the Lenovo part number of the following replacement