Related Manuals for Racing RAC4000T-A1
Summary of Contents for Racing RAC4000T-A1
- Page 1 ORIGINAL INSTRUCTIONS GASOLINE LAWNMOWER RAC4000T-A1 32, rue Aristide Bergès - ZI 31270 Cugnaux – France...
-
Page 2: General Safety Rules
GENERAL SAFETY RULES Instructions • Read the instructions carefully. Be familiar with the controls and proper use of the equipment. • Never allow children to use this mower. If the mower is given to an other people, also give this manual. Also make sure that this person uses this device only after receiving the necessary instructions. - Page 3 • Do not mow on steep slopes. • Use extreme caution when tipping or pulling the mower towards you. • Never use the mower with defective guards, or without safety devices such as baffles and or collection bins, which are not in place. •...
- Page 4 • In case of lack of knowledge or first use of this product, we recommend that you have a formation/ training with a professional or an experienced person. • Always use the mower with its pick-up bag and / or deflector in the intended position. •...
- Page 5 Fuel Handling Use caution when handling fuels. They are flammable and the vapours are explosive. Use only an approved container. Never remove the fuel cap or add fuel while the machine is on. Turn off the unit and allow the engine and exhaust components to cool down before refuelling.
-
Page 6: Care Instructions
be used in public areas, parks, sports, agricultural or forest areas. CARE INSTRUCTIONS IMPORTANT - Regular, careful maintenance is essential for keeping the safety level and original performance of the machine unchanged in time. Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular maintenance is essential for safety and performance. - Page 7 - Keep hands warm (wear warm gloves); - Take breaks. The following factors shorten the duration of use: - Personal tendency to suffer poor blood supply to (symptoms often cold fingers, tingling); - Use at low ambient temperatures; - Force exerted on the handles (a very firm grip discomfort irrigation blood). If you regularly use the machine for long periods and that symptoms listed above (e.g.
- Page 8 components have completely stopped be inspected regularly to verify that they are before touching them. well tightened. The blades are very sharp The blades continue to rotate after the and it is very easy to cut yourself. machine is switched off, a rotating blade can cause injury.
- Page 9 DESCRIPTION 1- Self-propelled bar 2- Upper bar 3- Operator control lever 4- Starter rope 5- Grass catcher 6- Flap...
- Page 10 7- Cutting height lever 8- Oil tank 9- Fuel tank 10- Air filter 11- Primer bulb Assembly Unpacking Remove all packing materials. Remove remaining packaging and transit supports (if existing). Check the completeness of the packing content. Check the appliance, the power cord, the power plug and all accessories for transportation damages.
- Page 11 Screw the handle with the two nut knobs and their screws. Install the hook on its location and fix it. Brake Cable Setup Put the brake cable to the hole of brake lever. (See the arrow mark) Clutch Cable Brake Cable Grass Bag Assembly ⚫...
-
Page 12: Before Operation
Before Operation Engine Oil The mower is shipped without oil in the engine. All engines are run at the factory prior to packaging. Most of the oil is removed prior to shipment; however, some oil remains in the engine. The amount of oil left in the engine varies. - Page 13 the dipstick (bottom edge of the dipstick). Do not overfill. Replace the oil tank plug / dipstick FUEL NOTICE: Engine delivered without gasoline; refuel 0.8 litre of before starting the engine. ⚫ Remove the filler cap. ⚫ Add fuel to the bottom of the fuel level limit in the neck of the fuel tank.
-
Page 14: Cutting Height Adjustment
brand. Gasoline is extremely flammable, and gasoline vapour can explode, causing serious injury or death. Use extreme care when handling gasoline. Keep out of reach of children. Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or sparks in the area where the engine is refuelled or where gasoline is stored. -
Page 15: Operation
Operation Starting the Engine ⚫ Primer In cold condition, it’s necessary to push the primer bulb before pulling the starter rope. Primer only for cool engine use Temperature Push time <0℃ 0℃~10℃ 10℃~20℃ PRIMER >20℃ BULB ⚫ Pull back on the operator control lever and hold it against the handle. Operator control lever The blade will continue to rotate for a few seconds after the... - Page 16 engine has stopped. Disconnect the spark plug cap if the lawnmower is to be left unattended. ⚫ Take the starter rope with your right hand and pull slowly as far as to have resistance, then pull energetically on the starter rope. (If the cold start is not sufficient enough, repeat this operation 2 or 3 times) Operation the controls for mowing...
-
Page 17: Stop Engine
Stop engine SELF-PROPELLED BAR Release the self-propelled bar. ⚫ ⚫ Release the operator control lever. OPERATOR CONTROL LEVER The blade will continue to rotate for a few seconds after the engine has stopped. Disconnect the spark plug cap if the lawnmower is to be left unattended. - Page 18 safety level and original performance of the machine unchanged in time. Lack of maintenance or improper maintenance can quickly damage the machine and give poor work results. ⚫ Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
- Page 19 A dull blade can be sharpened, but a blade that is excessively worn, bent, cracked, or otherwise damaged must be replaced. Check that the blade bolts are tight. Removal and installation Wear heavy gloves to protect your hands. ⚫ Remove the bolt with a socket wrench. Use a wooden block to prevent the blade from turning when removing the bolt.
-
Page 20: Grass Bag Cleaning And Replacement
⚫ Tighten the blade bolt with a torque wrench. Use a wooden block to prevent the blade from turning when tightening the bolt. BLADE ADAPTOR BLADE BOLT WASHER Grass Bag cleaning and replacement Cleaning Wash the bag with a garden hose, and allow it to dry completely before use;... - Page 21 Change Engine Oil Drain the used oil while the engine is warm. Warm oil drains quickly and completely. ⚫ Wipe the oil filler area clean, and then remove the oil filler cap/dipstick. Place a suitable container next to the mower to catch the used oil, and then tilt the ⚫...
- Page 22 For good performance, the spark plug must be properly gapped and free of deposits. ⚫ Disconnect the spark plug cap and remove any dirt from around the spark plug area. ⚫ Remove the spark plug with a spark plug wrench. ⚫...
- Page 23 Operator control lever cable adjustment If the operator control lever is loose, you should ⚫ turn the brake cable adjustment to tighten. (please see the picture) Maintenance Schedule REGULAR SERVICE Every PERIOD(4) First Every 3 Every 6 Every Before ITEM Month Months Months...
-
Page 24: Troubleshooting
clearance Combustion Clean After every 200 hours chamber Trouble Shooting ENGINE WILL NOT START Possible Cause Correction Out of fuel. Refuel Bad fuel; engine stored Drain the fuel tank and 1. Check fuel. without treating or draining carburettor. Refuel with fresh gasoline, of refuelled with gasoline. - Page 25 dealer, or refer to shop ignition malfunction, valves components as necessary. manual. stuck, etc. Storage The same petrol must not remain in the tank for more than one month. ⚫ ⚫ Thoroughly clean the mower and store it indoors in a dry place. ⚫...
-
Page 26: Technical Data
⚫ Always seek professional help when the carburettor requires adjustment. Clean the air filter according to directions. ⚫ ⚫ When, after many years of service, your machine needs to be replaced or is no longer required, we recommend that the machine is returned to you distributor for recycling. TECHNICAL DATA 660*510*410 Dimensions L x l x h... - Page 27 Electrode gap 0.5-0.6 mm Recommended fuel 95/98 oct unleaded 1000 (1.0L) Fuel tank capacity cm³ Fuel consumption Running time on tank of fuel SAE15W-40 Recommended oil Engine oil capacity Noise according: Sound pressure level L 81,8dB (A) K = 2, 5 dB (A) Sound power level L 93, 22 dB (A) K = 1, 43 dB (A)
- Page 28 32, rue Aristide Bergès -Z1 31270 Cugnaux - France Tel. +33 (0) 5.34.502.502 Fax: +33 (0) 5.34.502.503 Declares that the machine named below GASOLINE LAWNMOWER RAC4000T-A1 Serial number: Complies with the following European Directives: Machinery Directive 2006/42/EC EMC Directive 2014/30/EU...