Cutting Height Adjustment - Racing RAC4000T-A1 Original Instructions Manual

brand.
Gasoline is extremely flammable, and gasoline vapour
can explode, causing serious injury or death. Use
extreme care when handling gasoline. Keep out of reach of children.
Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames
or sparks in the area where the engine is refuelled or where gasoline is stored. Avoid
repeated or prolonged contact with skin or breathing of vapour.
After refuelling, tighten the fuel tank cap securely. If any fuel was spilled, make sure the
area is dry before starting the engine.

Cutting Height Adjustment

According operation to be performed, adjust the desired cutting height; Grasp the lever, pull it
to the right and then lower it to decrease the cutting height or raise it to increase the cutting
height
The blade can cause serious injury. Stop the engine
before adjusting cutting height.
14