Racing RAC4000T-A1 Original Instructions Manual page 16

engine has stopped. Disconnect the spark plug cap if the lawnmower is to be left
unattended.
⚫ Take the starter rope with your right
hand and pull slowly as far as to have
a resistance,
energetically on the starter rope. (If the
cold start is not sufficient enough,
repeat this operation 2 or 3 times)
Operation the controls for mowing
Blade is in action as soon as engine started. While the machine is working maintain the
security handle in working position. The engine will stop as soon as you release the
operator control lever.
Release the lever to stop the engine whenever you need to leave the mower.
Self-propelled bar
⚫
Push the self-propelled bar forward and hold it against the handlebar to propel the mower
forward.
Release the self-propelled bar to stop the mower's
forward movement.
Always release the self-propelled bar before starting
the engine. If this bar is engaged, the mower will move
forward.
Operate the self-propelled bar with a quick and
complete motion, so the bar is either fully engaged or
fully released. Hold the bar against the handlebar
during self-propelled mowing. This will help to extend the service life of the clutch
mechanism.
and then pull
16