Related Manuals for Racing RAC4640PL-1
Summary of Contents for Racing RAC4640PL-1
- Page 1 ORIGINAL INSTRUCTIONS GASOLINE LAWNMOWER RAC4640PL-1 Instruction manual WARNING: Read and understand all instructions and instructions. RACING 32, rue Aristide Bergès - ZI 31270 Cugnaux - France...
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS 2. YOUR PRODUCT 3. ASSEMBLY 4. FILLING FUEL TANK 5. USE 6. MAINTENANCE AND STORAGE 7. EC DECLARATION... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS Instructions • Read the instructions carefully. Be familiar with the controls and proper use of the equipment. • Never allow children to use this mower. If the mower is given to an other people, also give this manual. Also make sure that this person uses this device only after receiving the necessary instructions. - Page 4 • Never take or carry the mower while the machine is running. • Stop the machine and remove the ignition key, disconnect the spark plug from the spark plug: Before cleaning or unclogging the grass extractor. Before checking, cleaning, and working on the mower. After hitting an object.
- Page 5 • Do not use the tool where there is a risk of lighting. • During the operation, the lawnmower emits exhaust gases; these gases are poisonous and care makes in danger the life of the operator. Do not inhale them. Do not approach of exhaust gases and wear a protection mask when using the tool.
- Page 6 Symbols Read the instructions. Watch out for projections! Keep viewers away from work area. Danger! Keep your hands and feet away from the cutting element! Do not use the tool under rain. Blades continue to rotate after the engine stops. Hazardous products.
-
Page 7: Your Product
4. Throttle control 11. Cutting height lever 5. Lower bar 12. Oil dipstick 6. Hook 13. Air filter box 7. Grass catcher b. Technical data Model RAC4640PL-1 Nominal power 2.4kW Displacement 135cm³ Max engine speed 2850/min Cutting width 460mm Volume of the collection bag... -
Page 8: Assembly
3. ASSEMBLY a. Handles/bar Install the lower bar on the tool and screw it with the 4 screws and nuts (2 on each side). Combine the upper handle and the lower handle and put the screw. Install then the hook on the screw and then fix the handle with the 2 wing nuts. You can attach the cables with the clip supplied with the machine. - Page 9 b. Grass catcher Open and hold the flap. Insert the grass catcher and attach it to the bar with the hooks. The flap should fit securely. To remove the grass catcher, remove the hooks from the bar and remove the tray. c.
-
Page 10: Filling Fuel Tank
4. FILLING FUEL TANK a. Filling tank WARNING! Gasoline is extremely flammable. Store fuel in specially designed cans for this purpose. Fill the fuel tank only outdoors and before starting the engine. Do not smoke when filling the fuel tank or handling fuel. Never open the fuel tank cap and never add fuel while the engine is running or when it is hot. - Page 11 Engine oil Recommended oil: We recommend the use of high quality detergent oil classified for SF, SG, SH, SJ or higher. Do not use special additives. Filling oil tank Open the oil tank. Fill directly the oil in the tank. Do not overfill. Close the oil tank.
-
Page 12: Use
5. USE a. Starting the tool Before starting and using the mower, check for the presence and operation of safety devices. Also, check the condition of the blade and its securing bolt. If necessary, replace or repair defective items. Use only genuine original parts. If possible, mow only when the grass is dry. - Page 13 Pull back the starter until you feel resistance and then pull the handle firmly and briskly to turn the engine Repeat the above procedure as necessary until the engine starts. When starting from cold, gradually move the throttle lever to the full throttle position after a few moments of running.
-
Page 14: Maintenance And Storage
6. MAINTENANCE AND STORAGE Before working on the cutting system of the machine, switch off the engine and remove the spark plug’s cap. a. Cleaning the mower Cut grass is damp. Regular cleaning after each use will ensure better functioning of the mower and reduce the risk of corrosion or seizure. - Page 15 c. Mower maintenance Cutting system Before and after each mowing session, check that the blade, its attachment bolts and drive shaft are not damaged or excessively worn. Never try to straighten a bent blade. Replace a damaged, worn or bent blade as soon as possible. Use only genuine parts. Excessive vibration when mowing is a good indication of a problem with the cutting system.
- Page 16 Insert the filter cartridge into its housing and replace the air box lid, ensuring that each component is in place and properly installed. If the filter cartridge is damaged or is very dirty, replace it using a genuine part. WARNING: Do not twist the cartridge to clean foam, as you could damage it. This mower is equipped with a dual filtration system comprising a foam pre‐filter and a cartridge filter paper.
-
Page 17: Ec Declaration
32, rue Aristide Bergès -Z1 31270 Cugnaux - France Tel. +33 (0) 5.34.502.502 Fax: +33 (0) 5.34.502.503 Declares that the machine named below GASOLINE LAWNMOWER RAC4640PL-1 Serial number: Complies with the following European Directives: Machinery Directive 2006/42/EC EMC Directive 2014/30/EU...