Advertisement
Contact Us:
800.231.1327
specify@anovafurnishings.com
Tools Needed:
• 3/4" Hex Wrench
• 3/4 Hex Socket with Ratchet
• Retractable Measuring Tape
• Pencil
Component parts:
Cross Brace (2)
Hardware Needed: All hardware is stainless steel.
Hex Head Bolt
5/16" x 1-1/4" (6)
Assembly:
1.
Inspect the shipping container contents for damaged or missing components.
2. Lay all parts on a soft work surface or on the shipping packaging to prevent damage to finish.
NOTE: Before assembly, it is recommended that a light oil or petroleum jelly be applied to screw threads.
Assembly Instructions
2-1/2' Flat Bench, Portable
F1030R - 2-1/2' Recycled Plastic Flat Bench, Portable
F1030T - 2-1/2' Thermory Flat Bench, Portable
Seat (1)
Hex Head Bolt
5/16" x 3" (2)
Nylock Nut
Flat Washer
5/16"-18
5/16"(16)
316 (8)
Legs (2)
Rubber Foot (4)
1
Advertisement
Table of Contents
Related Manuals for Anova F1030R
Summary of Contents for Anova F1030R
- Page 1 Assembly Instructions 2-1/2’ Flat Bench, Portable F1030R - 2-1/2’ Recycled Plastic Flat Bench, Portable F1030T - 2-1/2’ Thermory Flat Bench, Portable Contact Us: 800.231.1327 specify@anovafurnishings.com Tools Needed: • 3/4” Hex Wrench • 3/4 Hex Socket with Ratchet • Retractable Measuring Tape •...
- Page 2 Assembly Instructions 2-1/2’ Flat Bench, Portable 3. Locate the leg and two rubber feet and place them as shown. 4. Insert the two rubber feet into the bottom of the leg. Use a rubber mallet if necessary. 5. Repeat steps 3 and 4 with the remaining leg and rubber feet.
- Page 3 • This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to remove MAINTENANCE surface dirt. Do not clean with a solvent or petroleum based products. 05/12/2023 Copyright 2023 Anova® Manufactured in the U.S.
Need help?
Do you have a question about the F1030R and is the answer not in the manual?
Questions and answers