ADJ HYDRO SPOT 1 User Manual page 11

I N S TA L L AT I O N
CLAMP MOUNTING
This fixture features mounting points on the underside for the attachment of two Omega brackets.
Additionally, the unit also features a safety cable loop on the underside, near one of the carry
handles (see the illustration below). When mounting the fixture to a truss or any other suspended or
overhead installation, be sure to secure appropriately rated mounting clamps (not included) to each
Omega bracket. Please note that two Omega brackets and two mounting clamps are needed
to safely support the fixture in a suspended installation. Attach a separate SAFETY CABLE
of the appropriate weight rating to the provided safety cable loop. NEVER use carry handles as an
attachment points for the safety cable.
OMEGA
CLAMP
MOUNTING
POINTS
(2 per clamp)
TURE IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIX-
WILL NOT FALL IF THE CLAMP FAILS.
MOUNTING
CLAMPS
SAFETY CABLE:
11
OMEGA
CLAMPS
SAFETY
CABLE
LOOP