Table of Contents
Advertisement
C O N T R O L PA N E L
The Hydro Spot 1 features a display screen with a 6-button control pad, which can be used to easily
adjust any device settings.
• The MODE button cycles through main menu options, or returns to the previous menu without mak-
ing changes.
• The ENTER button is used to select the highlighted option, or to confirm a selection.
• The UP, DOWN, LEFT, and RIGHT buttons are used to navigate and adjust menu options and set-
tings displayed on the screen.
KEY LOCK
This function allows the user to configure whether or not the display screen and control panel keys
will lock after a certain period of inactivity. It can be accessed by navigating to Personality > Display
> Key Lock in the system menu. The setting options are described below:
•
OFF: The display screen and control panel keys remain active at all times.
•
ON: The display screen and control panel keys automatically lock after a certain period of
inactivity, which can be set under Personality > Display > Screen Saver Delay. To unlock, press
and hold the MODE button for 10 seconds.
•
ON1: The display screen and control panel keys automatically lock after a certain period of
inactivity, which can be set under Personality > Display > Screen Saver Delay. To unlock, press
UP, DOWN, UP, DOWN, ENTER in that order.
BATTERY
This unit features a dedicated battery that can be used to power the screen display. This allows the
user to configure the device's channel mode, DMX address, or any other screen-accessible features
without needing to power on the device or even connect it to a power source. To activate the display
on battery power, press and hold the MODE button for 3 seconds. Please note that the battery is
NOT user-accessible, and the user should NOT attempt to access or replace the battery, as
doing so may void your manufacturer's warranty. If battery replacement is required, please
contact ADJ service for assistance.
18
Advertisement
Table of Contents
