Specifications - Rotel RMB-1587MKII Owner's Manual

12

Specifications

Power Output (7ch driven, 8 ohms) Power Output
Power Output (7ch driven, 4 ohms) Power Output
Power Output (2ch driven, 4 ohms) Power Output
Total Harmonic Distortion Total Harmonic Distortion
Intermodulation Distortion Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
Frequency Response (+0dB, –0.3dB) Frequency Response
Damping Factor (1 kHz, 8 ohms) Damping Factor
Input Impedance/Sensitivity Input Impedance/Sensitivity
Unbalanced
Balanced
Gain Gain
Signal to Noise Ratio (A Weighting) Signal to Noise Ratio
Crosstalk/Separation Crosstalk/Separation
Power Requirement Power Requirement
USA
EC
Power Consumption Power Consumption
BTU BTU (4 ohms, 1/8 power) (4 ohms, 1/8 power)
Dimensions Dimensions (W X H X D)
Front Panel Height Front Panel Height
Weight (net) Weight
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
The Rotel logo is a registered trademark of The Rotel Co., Ltd. Tokyo,
Japan.
RMB-1587MKII Seven Channel Power Amplifier
155 watts / channel
250 watts / channel
335 watts / channel
< 0.03%
< 0.03%
10Hz - 100kHz
330
12k Ohms / 1.61 volt
50k Ohms / 3.4 volt
26.6 dB
111 dB
> 55 db
120 Volts, 60Hz
230 Volts, 50Hz
1400 Watts
4016 BTU / h 4016 BTU / h
431 x 237 x 456 mm
17 x 9 1 / x 18 ins
3
5U / 221mm / 8 3 / ins
4
37.6 kg / 82.9 lbs