Table of Contents
Advertisement
Installing the handle:
1.
Push the aluminium tube into the plastic coupler and insert into the antenna unit through the hole in the
ceiling With the plastic coupler pushed up tight to the ceiling, mark the aluminium tube along all four sides.
Drilled hole
Aluminium tube
Coupler
2.
Cut the 20mm square tube with a hacksaw.
Make the cut so that the line is left on the
discarded part of the tube.
3.
Now mark and cut the 4mm spindle so that it is
40mm longer than the tube.
40mm
Page 9
Advertisement
Table of Contents
