Table of Contents
Advertisement
Skew adjustment:
The LNB Skew has been set at
a factory default position as
per image below. This is
optimised for the Optus D1
satellite and will allow good
signal strength all over New
Zealand.
Skew adjustment is only
required when signal strength
is weak at the limit of given
satellites' reception area.
It involves adjusting the angle
of the LNB on the roof mounted
antenna unit once you have
found the signal. Adjust until
you find the strongest signal.
Caution:
Follow general safety advice
on page 3 when adjusting
Antenna Unit.
D1 FSS Reception map:
Page 16
Default LNB position.
9 o'clock
Approximately
8 o'clock
12 o'clock
6 o'clock
3 o'clock
Page 15
Advertisement
Table of Contents
