In The Event Of Power Failure; Display Information; Wall Mounting - Sanyo CLT-9839 User Manual

In the event of a power failure
Using four AA batteries (not supplied), the power-failure backup system allows you to
continue using this cordless telephone (both handset and base) in the event of a
power failure.
The backup time can last up to 20 hours in standby mode or 6 hours of talk time.
Note : The backup duration may be shorter when the backup batteries are not
fresh or handset battery is not fully charged.
While the telephone is powered by the backup batteries, the following operations
are not functional:
• Caller information will not appear.
• Callers List and Option List cannot be reviewed.
• Directory cannot be reviewed.

Display information

Base in use
The base station is in use.
Battery LOW
Handset needs recharging.
CHXX Scanning
Channel scanning taking place.
Check messages
You have new messages in the voice mail service.
Out of range
Handset is too far away from the base.
Try again
Handset may be too far from base.
May be no AC power to base station. Check all connections.
E42

Wall mounting

To mount the base station on a wall:
1
Remove the handset hanger from the base station,
turn it upside down and then reattach it.
2
Tuck the telephone cord inside the wall mount bracket.
3
Insert the upper hooks of the wall mount bracket into the
holes in the bottom of the base stations.
Then push the bracket down firmly.
4
Connect the telephone cord to a wall phone plate
(not supplied). Mount the base station on the wall phone
plate, and seat it securely.
5
Hang the handset on the base station with keypad
facing front.
E43