Table of Contents
Advertisement
Using the speakerphones
The CLT 9839 has two speakerphones--one on the handset and the other on the base
station--which allow you to answer and place a call on either unit. Both speakerphones
let you have handsfree phone conversation with no need to hold the handset.
BASE STATION
To place a call from the base station:
1
Press
SPEAKER
to get a dial tone.
The SPEAKER indicator lights.
2
Dial the number.
3
Press
SPEAKER
to hang up.
To answer a call at the base station:
1
Press
to answer a call.
SPEAKER
The SPEAKER indicator lights.
2
Press
SPEAKER
again to hang up.
To adjust the speaker volume:
Slide the VOLUME control foward you
(LOW) or away from you (HIGH). This
will also change the ringer volume level.
CAUTION
When using the handsfree handset speakerphone, keep the speaker ( located
on the back of the handset) away from your ear to prevent any damage to
your ear.
HANDSET
To place a call using the handset
speakerphone:
1
Press
and listen for a dial tone.
The
indicator lights.
handsfree
The display shows
.
2
Dial the number.
3
Press
to hang up.
END
To answer a call using the handset
speakerphone:
1
Press
.
The
indicator lights.
2
Press
END
to hang up.
If the handset is on the base station,
pressing
or any key also
TEL
turns on the handset speakerphone.
To adjust the speaker volume:
The handset speaker has 3 volume levels:
HIGH/MIDDLE/LOW. Press
or
a call to increase or decrease the level.
E22
Call Management services
The CLT-9839 enables you to take advantage of many call management services
which are available through your telephone company. All services require a
subscription from your telephone company. Availability and names of these services
may vary by region.
Caller ID
Once you subscribe to this service, the display shows the name and telephone
number of the calling person before you pick up the phone. This way, you can
screen calls when you are at home.
The information that appears on the display is kept in the callers list memory of your
telephone whether you answer or not. The callers list holds information of up to 30
callers. You can view the list on the display by scrolling through it, and call back the
caller shown on the list at the touch of a button. You can also transfer any number
to the 30-number directory memory.
If neither caller's name or number is available, it will indicate the reason. This
varies, depending on the type of call and where it originated. Some display
examples are shown on the next page.
The caller information display remains until you hang up or press a dialing button.
Caller information will not appear in the event of a power failure.
Visual Call Waiting
With Visual Call Waiting service and your CLT-9839, you will not have to interrupt
your conversation for every new incoming call. The phone's LCD display shows you
who's calling, even when you are on the phone.
Call Waiting Options
This new call management service will provide you with more choices on how to
handle the second call when you are already on the phone. You can switch
between 2 callers, have a 3-way conference call with both callers, send the second
during
caller to your voice mail, or answer second caller with a prerecorded message
asking them to hold the line.
Alison McNab
416-421-8344
E23
Advertisement
Table of Contents
