Intercom; Transferring A Call - Sanyo CLT-9839 User Manual

Intercom

FROM BASE STATION TO HANDSET
1
Base station:
Press to page handset.
PAGE / INT
The IN-USE and INTERCOM indicators flash.
2
Handset:
Press or
INT TEL
The IN-USE indicator lights.
3
Handset:
Press to turn off intercom.
END
If the handset does not answer within 20 seconds, the base station automatically
returns to the standby mode.
FROM HANDSET TO BASE STATION
1
Handset:
Press to page the base station.
INT
The IN-USE indicator flashes.
2
Base station:
A beep sounds, and the IN-USE and INTERCOM
indicators light.
The base station user can begin talking.
3
Handset:
Press to turn off intercom.
END
Handset user cannot use speakerphone for intercom conversation.
Paging you
and begin talking.
Intercom
CH 5
Paging base
Intercom
CH 5
E38

Transferring a call

A call can be transferred between the handset and the base station.
FROM BASE STATION TO HANDSET
1
Base station:
Press to alert the handset user.
PAGE / INT
The call is put on hold.
The IN-USE, INTERCOM and SPEAKER indicators flash.
2
Handset:
Press or
INT TEL
the base station.
The IN-USE indicator lights.
3
Handset:
Press to talk to the caller.
TEL
Base station automatically switches to standby mode.
If the handset does not answer, press
FROM HANDSET TO BASE STATION
1
Handset:
Press INT to page the base station.
The call is put on hold.
2
Base station:
A beep sounds, and the IN-USE indicator flashes and
INTERCOM indicator lights.
The base station user can answer the handset.
3
Base station:
Press to talk to the caller.
SPEAKER
Handset automatically turns off intercom mode, but the caller display remains until
the handset user hangs up.
If the base station does not answer, press
Handset cannot transfer a call if the handset speakerphone is in use.
Paging you
to answer
Intercom
0:10
I
0:11
to talk to the caller again.
SPEAKER
Paging base
Intercom
0:10
to talk to the caller again.
TEL
E39