Configuration - D-Link DSL-2740U User Manual

DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

Configuration

On the System / Configuration page, you can change the password for the administrator account
used to access the web-based interface of the router and to access the device settings via TELNET,
restore the factory defaults, backup the current configuration, restore the router's configuration from
a previously created file, save the changed settings to the non-volatile memory, reboot the device, or
change the web-based interface language.
In order to change the password for the administrator account, in the User section, enter a new
password in the Password and Password confirmation fields. Click the Show icon (
display the entered password. Use digits, Latin letters (uppercase and/or lowercase), and other
characters available in the US keyboard layout.
Remember or write down the new password for the administrator account. In case of losing
!
the new password, you can access the settings of the router only after restoring the factory
default settings via the hardware RESET button. This procedure wipes out all settings that
you have configured for your router.
To change the web-based interface language, select the needed value from the Language drop-
down list.
4 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Figure 117. The System / Configuration page.
4 Then click the SAVE button.
Page 153 of 174
Configuring via Web-based Interface
) to