Mac Filter - D-Link DSL-2740U User Manual

DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

MAC Filter

On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers
of the router's LAN.
Select the needed action from the drop-down list in the Default mode section to configure
filtering for all devices of the router's network:
Allow: Allows access to the router's network and to the Internet for devices (the value is
•
specified by default);
Deny: Blocks access to the router's network for devices.
•
If you need to specify a filtering mode for each device separately, create a relevant rule. To do this,
click the ADD button.
Figure 114. The Firewall / MAC Filter page.
Figure 115. The window for adding a rule for the MAC filter.
Page 149 of 174
Configuring via Web-based Interface