Volt VPL-1043-4-BBK Installation Instructions Manual

Volt VPL-1043-4-BBK Installation Instructions Manual

Volt low voltage landscape lighting

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
VOLT
LOW VOLTAGE LANDSCAPE LIGHTING
®
VOLT
Wide Modernelle Brass Path & Area Light
®
ITEM: VPL-1043-4-BBK
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPL-1043-4-BBK and is the answer not in the manual?

Questions and answers

Summary of Contents for Volt VPL-1043-4-BBK

  • Page 1 INSTALLATION INSTRUCTIONS VOLT LOW VOLTAGE LANDSCAPE LIGHTING ® VOLT Wide Modernelle Brass Path & Area Light ® ITEM: VPL-1043-4-BBK 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
  • Page 2 INSTALLATION INSTRUCTIONS VOLT - Wide Modernelle Brass Path & Area Light - VPL-1043-4-BBK ® IMPORTANT: PLEASE READ BEFORE INSTALLATION This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instruc- tions may result in serious injury, property damage and void the warranty.
  • Page 3 PACKAGE CONTENTS A. (1) Fixture Body PARTS REQUIRED (SOLD SEPARATELY) A. (1) G4 Bi-Pin PRODUCT DIMENSIONS 2” 6” 1” 22” 813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com...
  • Page 4 INSTALLATION INSTRUCTIONS VOLT - Wide Modernelle Brass Path & Area Light - VPL-1043-4-BBK ® REMOVE LENS Remove the lens from the Fixture fixture by loosening the screws. Lens Screw Install G4 Bulb Insert the Bi-Pin with Socket correct wattage and type marked on fixture label and push into place.
  • Page 5 Install Lens Place the lens back onto Fixture the fixture and secure with the previously removed screws. Tighten until snug. Lens Screw Install Stake Determine the desired location Board for mounting the stake mount. Hammer the stake into the ground until flange of stake is flush to grade.
  • Page 6 INSTALLATION INSTRUCTIONS VOLT - Wide Modernelle Brass Path & Area Light - VPL-1043-4-BBK ® INSTALL FIXTURE TO STAKE Pass the fixture wire through the center hole of the stake. Thread the fixture on to the stake and hand tighten until snug.
  • Page 7 INSTALL/ REPLACE G4 BULB Please reverse Step 2 - Step 3 to expose the bi-pin and replace it with the correct wattage and type marked on the fixture label. And then reinstall the lens. IMPORTANT: Bi-Pin must be protected from moisture and dust at all times.
  • Page 8 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST) Specifications and product details subject to change without notice. © Copyright 2023, VOLT Lighting, Lutz FL USA 33549 • All rights reserved. ® customersupport@voltlighting.com • www.voltlighting.com...

Table of Contents