Low voltage landscape lighting low voltage path light (8 pages)
Summary of Contents for Volt Salty Dog MR11
Page 1
INSTALLATION INSTRUCTIONS VOLT LOW VOLTAGE LANDSCAPE LIGHTING ® VOLT Salty Dog MR11 Brass In-Grade Light ® ITEM: VWL-7120-4-PBK 1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
Page 2
INSTALLATION INSTRUCTIONS VOLT Salty Dog MR11 Brass In- Grade Light - VWL-7120-4-PBK ® IMPORTANT: PLEASE READ BEFORE INSTALLATION This fixture is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
PACKAGE CONTENTS A. (1) Fixture Body PARTS REQUIRED (SOLD SEPARATELY) A. (1) MR11 Lamp PRODUCT DIMENSIONS 2.75” 2.85” 813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com...
Page 4
INSTALLATION INSTRUCTIONS VOLT Salty Dog MR11 Brass In- Grade Light - VWL-7120-4-PBK ® REMOVE FACEPLATE Use a screwdriver to loosen Screw the screws on the faceplate and remove the lens from the fixture body. Faceplate Lens Fixture Body INSTALL LAMP...
Page 5
DIG HOLE Prepare a hole in the ground. Make sure there 3” 3” are approximately 3” spaces surrounding the fixture for pea gravel or sand. Hole 3” Soil WIRE CONNECTION Wire Connectors Supply Cables Main Supply Cable Pigtail Strip both leads from the luminaire pigtail. Using two wire connectors (sold separately), connect the leads from the fixture body to the main supply cable leads.
Page 6
INSTALLATION INSTRUCTIONS VOLT Salty Dog MR11 Brass In- Grade Light - VWL-7120-4-PBK ® FILL HOLE Install the fixture in the Pea Gravel or Sand hole and fill the hole with Fixture pea gravel or sand. Soil 813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com...
Page 7
Install/Replace Glare Guard REMOVE FACEPLATE Use a screwdriver to loosen the screws on the faceplate Screw and remove the lens from the fixture body. Faceplate Lens Fixture Body REPLACE FACEPLATE Place the lens and faceplate Screw onto the fixture body and secure with previously Faceplate removed screws in a star...
Need help?
Do you have a question about the Salty Dog MR11 and is the answer not in the manual?
Questions and answers