Page 2
INSTALLATION INSTRUCTIONS VOLT Multi-Flux Integrated LED Brass Spotlight (Bronze) ® VAL-2011-4-BBZ Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents A. (1) Fixture Parts Required A. (1) Mounting Accessory Product Dimensions 2.4” 3.6” 4” Install Stake Determine the desired location for mounting the Board stake. Hammer the stake into the ground until flange of stake is flush to ground. To avoid damage to the stake, place a board on top of the Stake...
Page 4
INSTALLATION INSTRUCTIONS VOLT Multi-Flux Integrated LED Brass Spotlight (Bronze) ® VAL-2011-4-BBZ Install Fixture to Stake Pass the fixture wires through the open slot of Fixture the stake and thread the fixture onto the stake. Fixture Wire Clear away an area in the...
Page 5
Adjust Fixture Direction Adjust the fixture to your desired direction by loosening the knuckle. Always tighten the knuckle once your desired direction is achieved. Fixture Knuckle Change the Fixture Light Output Fixture Push Button Change the light output of the fixture by using the push button on the back.
Page 6
INSTALLATION INSTRUCTIONS VOLT Multi-Flux Integrated LED Brass Spotlight (Bronze) ® VAL-2011-4-BBZ w w w . v o l t l i g h t i n g . c o m - 6 -...
Need help?
Do you have a question about the VAL-2011-4-BBZ and is the answer not in the manual?
Questions and answers