Table of Contents
Advertisement
Step 4.
If the cabinet comes with door position monitor devices, complete the following steps to remove
and reinstall the devices.
a.
Remove the two screws that secure the door position monitor device to the cabinet frame.
Figure 56. Removing the door position monitor device
b.
Install the device to the equivalent location on the opposite side on the cabinet frame.
Figure 57. Installing the door position monitor device
c.
Remove the device from the door, and install it to the equivalent location on the opposite side
of the door.
48
ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide
Advertisement
Table of Contents
