Figure 41. Securing the lower bracket
Step 8.
Connect the two eyebolts and two keyholes in the upper wall mounting bracket to the hook of a
crane lifter, and make sure the cord length allows an angle more than 75˚.
Step 9.
Remove the two top cover screws above the lower bracket, and secure the upper bracket with
these two screws.
Step 10. Measure the wall with the cabinet to locate the four spots corresponding to the four holes on the
wall mount brackets.
Step 11. Align a spacer to one of the locations, and drive a wall mount nail with washer into the wall.
.
Chapter 6
Installing optional kits
35