Safety Information - Fluke Ti300 PRO User Manual

Professional series thermal imagers, gas leak detector
Hide thumbs Also See for Ti300 PRO:
Table of Contents

Advertisement

Ti300 PRO, Ti300+, Ti400 PRO, Ti401 PRO, Ti450 PRO, Ti450 SF6, Ti480 PRO
Users Manual

Safety Information

A Warning identifies hazardous conditions and procedures that are dangerous to the user. A Caution identifies
conditions and procedures that can cause damage to the Product or the equipment under test.
To prevent possible electrical shock, fire, or personal injury and for safe operation of the
Product:
Read all safety information before you use the Product.
Carefully read all instructions.
Do not alter the Product and use only as specified, or the protection supplied by the Product
can be compromised.
Replace the batteries when the low battery indicator shows to prevent incorrect
measurements.
Do not use the Product if it operates incorrectly.
Do not use the Product if it is altered or damaged.
Disable the Product if it is damaged.
See emissivity information for actual temperatures. Reflective objects result in lower than
actual temperature measurements. These objects can pose a burn hazard.
Do not put battery cells and battery packs near heat or fire. Do not put in sunlight.
Do not disassemble or crush battery cells and battery packs.
Remove batteries to prevent battery leakage and damage to the Product if it is not used for an
extended period.
Connect the battery charger to the mains power outlet before the charger.
Use only Fluke approved power adapters to charge the battery.
Keep cells and battery packs clean and dry. Clean dirty connectors with a dry, clean cloth.
Batteries contain hazardous chemicals that can cause burns or explode. If exposure to
chemicals occurs, clean with water and get medical aid.
Do not disassemble the battery.
Repair the Product before use if the battery leaks.
Use only the external mains power supply included with the Product.
Do not put metal objects into connectors.
Use only specified replacement parts.
Have an approved technician repair the Product.
Remove the batteries if the Product is not used for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not removed, battery leakage can damage the
Product.
2
*W Warning

Advertisement

Table of Contents
loading

Table of Contents