Replacing Cartridges; To Remove A Cartridge - HP Designjet 700 Quick Reference Manual

Replacing Cartridges

To Access the Cartridges
1 Leave the plotter switched ON.
2 If you are responding to a
otherwise, press the
carriage is not in use, it moves out so you can access it.
3 When the carriage stops, open the window.
W A R N I N G
To Check a Cartridge's Ink Level
Level indicator

To Remove a Cartridge

Press down lightly on the cartridge and pull it toward you. Lift it
out of its stall. Discard it, if it is not required.
2
DesignJet 700
A dot above the stall indicates the color of the cartridge.
Service cartridges
Access Cartridges
The stainless steel strip behind the cartridge carriage
is very sharp. Keep hair, jewelry, clothing, and
foreign objects away from plotter mechanisms. Keep
new or used cartridges away from children.
Black
1
1
request, press the key,
key. When the cartridge
Green = full
Less than half full
Black = empty
Yellow
2
1
1
DesignJet 750C Plus
19
0002
Cyan
Magenta
Black
1119