Table of Contents
Advertisement
5.3
Save Image
Up to 16 captured images can be stored by increasing the number of cycle buffers
memory. Set number of cycle buffer memory is the number of storable images.
MAXIMG=a[CR]
MAXIMG=1[CR] (*)
*: Default
5.3.1 Save Preprocessed Image
Selects an image to save from the 2 images captured before or after
preprocessing. (This function is only valid for latest images)
IMGSEL=0[CR]
IMGSEL=1[CR] (*)
*: Default
5.3.2 Overwrite save
When the number of save images exceeds the cycle buffer memory's, the oldest
image will be overwritten.
5.3.3 Preparation for transmitting the saved image
The saved image whose preparation of transmission is completed can be
transferred to the host using the "Configurator LP-ABR" software.
† When the Camera Control Mode is other than Table Mode
IMGFRAME=0,a[CR]
† When the Camera Control Mode is Table Mode
IMGFRAME=1,b[CR]
a=1-16 Specifies number of cycle buffer memory.
Saves captured images (Raw images)
Saves decoded images (*)
a=1 to 16
1: Preparation for last saved image.
2 to 16: Preparation for (a-1) previous image from the latest
b=1 to 8
Prepare an image taken in table No. (b) for transmitting.
60
Advertisement
Table of Contents
