Table of Contents
Advertisement
7 Serial Command (RS-232C, LAN)
-
The following serial commands can be used through both RS232C and LAN
(TCP/IP) interface unless otherwise specified.
Serial command format
Serial command + [CR]
[Header] + Serial command + [Terminator]
-
To add header and terminator characters to a serial command, send the command
"CMDFORM=1".
The header and terminator characters are same with the ones to add to
captured data. This is a compatible operation without the terminator.
-
To return the input format of the configuration commands to compatible
(configuration command + [CR] ), send the command "CMDFORM=0".
Default (Backward compatible)
79
Advertisement
Table of Contents
