5.8
Internal flash memory recovery process
If the power is turned off while saving the settings in the internal flash memory, the
area where the settings are saved may be damaged.
Image reader checks the status of the internal flash memory at startup and performs
recovery processing if it is damaged.
The recovery process takes approximately 3 minutes.
Do not turn off image reader during the recovery process.
The operation of image reader at the time of recovery is as follows.
1.
Image reader start buzzer sounds
-2 long buzzers(The second buzzer sound has a higher pitch than normal)
2.
Blink LED-A,B,C,D(
3.
Start internal flash memory recovery processing(about 3 minutes)
4.
Finish internal flash memory recovery processing
-LED illumination(
5.
Image reader start processing completion buzzer sounds
-3 shot buzzers
■■■■□□□□
)
■□□□
)
68