Table of Contents
Advertisement
4.3
Camera Control Mode
Camera Control Parameter consists of tables whose reading parameters are stored
in and a camera control mode which operates tables.
Camera Control Mode
Fixed gain: D
Table:
Select one from the 2 types of camera control mode (AGC).
Fixed Gain Mode [AGC=D] (Default)
In Fixed Gain Mode, the reader uses only Table #0 settings. The settings in
Table #0 will not be changed automatically.
Use this mode to decode a moving object. You can configure this mode even to
a motionless object.
Table Mode [AGC=T]
In Table Mode, the reader configures some combinations of pre-set parameters
and uses in turn. The combination of settings are used after being stored in a
table.
The detail of Table Mode is described in the next section.
Reference
Table Mode is suitable for reading of motionless symbol.
T
46
Table
Table #0
Table #1
Table #2
Table #3
Table #4
Table #5
Table #6
Table #7
Table #8
Advertisement
Table of Contents
