Toro GeoLink 41624 Operator's Manual page 10

If the display shows all light gray, you can spray
every area.
Using the Easy Mode with an
Existing Job
Note:
A job is set up in the standard mode. Ensure
any previous job information is deleted before
repeating an existing job.
1. Start the machine and keep the key in the
position.
2. Open the sprayer-controller icon
Figure 14
1. Sprayer-controller icon
3. In the sprayer-controller screen, determine if the
correct rate (gal/ac) is selected.
4. If the rate is not correct, change the rate with
the preset rates, incrementally or selecting
the current rate and manually entering the
application rate (Figure
Figure 15
1. Current rate
2. Preset-rate icons
All manuals and user guides at all-guides.com
RUN
(Figure 14).
g031532
15).
g031494
3. Decrease and increase
icons
4. Sprayer-controller icon
5. Select the field menu icon.
6. Select the name of the existing field
1. List of existing fields
2. Field-list icon
7. Select the job-menu icon
8. Select the existing job
1. Job-menu icon
2. Job-list icon
9. Turn the section switches, located between the
seats, to the
ON
10
(Figure
Figure 16
3. Field-menu icon
(Figure 17).
(Figure 17).
Figure 17
3. List of existing jobs
position (Figure 18).
16).
g031533
g031534