Table of Contents
Advertisement
❷ Mounting the Optional Board (sold separately)
CAUTION
Before mounting or removing the optional board, be sure to turn off the projector, wait for the fans to stop and turn
off the main power switch.
Tool needed: Phillips screwdriver (plus-head)
1. Turn off the main power switch of the projector.
2. Loosen the two screws on the SLOT cover of the
terminals.
Remove the two screws and the SLOT cover.
NOTE:
• Keep the two screws and the slot cover.
3. Insert the optional board into the slot.
Make sure that the board is inserted into the slot in the
correct orientation.
Incorrect orientation may cause miscommunication
between the optional board and projector.
165
8. Appendix
Advertisement
Table of Contents
