Table of Contents
Advertisement
• NAME
PROJECTOR NAME
HOST NAME
DOMAIN NAME
• ALERT MAIL
ALERT MAIL
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1, 2, 3
TEST MAIL
SAVE
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 alphanumeric characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
Enter the hostname of the network connected to the projector. A host name must be
15 alphanumeric characters or less.
Enter the domain name of the network connected to the projector. A domain name
must be 60 alphanumeric characters or less.
This option will notify your computer of error messages via e-mail when using wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Information
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: PX1004UL Series
LIGHT HOURS USED: 0000[H]
Enter sender's address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient's address. Up to three addresses can be entered.
Send a test mail to check whether your settings are correct or not
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network
settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this
happen, check if the Recipient's Address is correct.
Click this button to save your settings to the projector's memory.
56
3. Convenient Features
Advertisement
Table of Contents
