LifeSpan Reformer 2 Safety User Manual page 19

LUBRICATION REMIND FUNCTION
This machine has lubrication remind function. After every total running distance of 300km (188miles),
your treadmill needs to be maintained with oil. The system will remind with sound for every 10 seconds,
and window will show "OIL". This means that your treadmill needs to be lubricated with oil. Please
read the user's manual first, and add the oil to the middle part of running board. After you finishing
lubrication, please hold on "STOP" button for 3 seconds, and the system warning sound will disappear.
SAFETY LOCK FUNCTION
Under any mode, if you pull away the safety key, the machine will stop. The window will show --- with
reminding sound. The machine cannot work until safety key is inserted back.
POWER SAVE FUNCTION
The machine is with energy saving function. Under standby mode, at the state of waiting for operation,
if without any operation, the saving on power function will be available after 10 minutes, the display will
be closed up. You can press any button to turn on the display.
POWER ON AND POWER OFF
Switch off the power: You can switch off the power to stop the treadmill, which won't be damaged at any
time. If you are not using the treadmill for a while, we recommend to switch off from the power switch to
prolong life of the control board.
CAUTION:
1. We recommend that you maintain a slow speed at the beginning of a session and hold on to the
handrails until you become comfortable and familiar with the treadmill.
2. Attach the magnet end of the safety pulling rope to the computer and also attach the clip of the
safety pulling rope to your clothing.
3. To end your workout safely, press the STOP button or pull out the safety pulling rope, then the
treadmill will stop immediately.
OPERATION GUIDE | 19