H3C LSPM2SP2P User Manual

Interface card

H3C LSPM2SP2P Interface Card

User Manual-V1.03

Introduction to LSPM2SP2P

Overview

The LSPM2SP2P interface card provides two 10-Gbps SFP+

fiber ports.

Figure 1 Front panel of the LSPM2SP2P interface card

Table of Contents

Do you have a question about the LSPM2SP2P and is the answer not in the manual?

Page 1 H3C LSPM2SP2P Interface Card User Manual-V1.03 Introduction to LSPM2SP2P Overview The LSPM2SP2P interface card provides two 10-Gbps SFP+ fiber ports. Figure 1 Front panel of the LSPM2SP2P interface card...
Page 2 (32.81 ft.) Note: H3C recommends that you use SFP+ transceiver modules and SFP+ cables of H3C on the LSPM2SP2P. The types of SFP+ transceiver modules and SFP+ cables may update with time. For information about them, contact H3C technical support or marketing staff.
Page 3 The port is not up. Note: Port LED of the LSPM2SP2P interface card is not affected by the port mode switching button on your switch. For more information about the port mode switching button, see the installation guide of the switch.
Page 4 Installing the interface card to the switch Note: The procedure of installing the LSPM2SP2P interface card to different models of H3C switches is similar. This manual takes the S5500-28C-EI switch as an example. Follow these steps to install the interface card to the switch:...
Page 6 Hangzhou H3C Technologies Co., Ltd. provides customers with comprehensive technical support and service. If you purchase the products from the sales agent of Hangzhou H3C Technologies Co., Ltd., please contact our sales agent or technical personnel. Address: 310 Liuhe Road, Zhijiang Science Park, Hangzhou, Zhejiang Province, P.