Engine Support Arm Assembly Installation - Peco Estate 795003 Operator's Manual

Engine Support Arm Assembly Installation

Estate Series Unit Instructions
First, install the Mount Arm Swivel Assembly (Item #2) by aligning the bolt holes to those of the Tongue Tube (Item
#3). Secure the Mount Arm Swivel Assembly by using (2) 1/2"-13 x 3-1/4" HHCS (Item #4) and (2) 1/2"-13 Ny-Flange
Lock Nuts (Item #5). Refer to Figure A.
Then, install the Engine Support Arm Assembly (Item #2) onto the Mount Arm Swivel Assembly by using (2) 1" Flat
Steel Washer (Item #6) and (1) 1" Bronze Thrust Washer (Item #7). Refer to Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
21