Tongue Assembly Installation; Engine Support Arm Assembly Installation - Peco Estate Series Operator's Manual

Tongue Assembly Installation

Position the Tongue Assembly (Item #1) between the Tongue Support Bracket of the 50 Trailer Assembly (Item #2)
aligning the bolt holes of both parts. Secure the Tongue Assy by using (3) 1/2"-13 x 3-1/2" HHCS (Item #3) and (3)
1/2"-13 Flange Nuts (Item #4). See Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A

Engine Support Arm Assembly Installation

Install the Engine Support Arm Assembly (Item #2) onto the Tongue Assembly (Item #1) by using (2) 1" Flat Steel
Washer and (1) 1" Bronze Thrust Washer. See Figure B below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
19