Box Top Panel Installation - Peco Estate 795003 Operator's Manual

Box Top Panel Installation

Start by attaching (14) Small Tinnerman Clips (Item #5) along the tops of the Side Panels and Front Panel, see Figure
A. Then set (4) Large Tinnerman Clips (Item #6) along the front edge of the Screen Frame Assy as shown in Figure B.
Secure the Top Panel A (Item #1) over the Front Panel and Side Panel by using (8) Tinnerman Screws (Item #4) along
the sides of the Top Panel A. Then, set the Top Panel B (Item #2) on top of the Top Panel A aligning the front mount
holes to the rear mount holes of Top Panel A. Secure the Top Panel B by using (6) #10-12 x 1/2" Tinnerman Screws
along the sides and (4) #10-12 x 3/4" Tinnerman Screws (Item #3) on top securing both Top Panels to the Screen
Frame Assy. Refer to Figure A.
Tighten all hardware at this time.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Side Panel
Side Panel
Figure B
6
Screen Frame
Assembly
6
Front Panel
Screen Frame
Assembly
6
Front Panel
6
13