Table of Contents
Advertisement
24. Technical Specifications
24.1 Performance
Mounting Location
Charging Mode
Display
Front LED
Charging Current
Dynamic Load Balancing
Charging Profile
Connector Type
Compliance
zappi
*
complies fully with EN 61851-1:2019 with the exception of Clause 8.4 in order to meet the requirements of BS
7671:2018 Amendment 1:2020 which requires the protective earth conductor to be switched in order to provide protection
against a damaged PEN conductor in a TN-C-S earthed electrical system.
24.2 Electrical Specifications
Rated Power
Rated Supply Voltage
Supply Frequency
Rated Current
Standby Power
Consumption
Integral Protection
Economy Tariff Sense
Input
Wireless Interface
Grid Current Sensor
Supply Cable Entry
24.3 Mechanical Specifications
Enclosure Dimensions
Protection Degree
Enclosure Material
Operating Temperature
Fixing Points
Weight
24.4 Connectivity
WiFi 2.4 GHz 802.11BGN Connection up to 150 Mbps
WiFi Frequency Range 2412-2484 MHz
Radio Frequency Range 868-870MHz
Radio Frequency (Australia) 915MHz
Page 32 of 41
Indoor or Outdoor (permanent mounting)
Mode 3 (IEC 61851-1 compliant communication protocol)
Graphical backlit LCD
Multicolour, according to charge status, current and user setting
6A to 32A (variable)
Optional setting to limit current drawn from the unit supply or the grid
3 charging modes: ECO, ECO+ or FAST. STOP is a further option
Type 2 tethered cable (6.5m) or type 2 socket with locking system
LVD 2014/35/EU, EMC 2014/30/EU, EN 62196-2:2017, ROHS
2011/65/EU, CE Certified, EN 61851-1:2019*
7kW (1-phase) or 22kW (3-phase)
230V AC Single Phase or 400V AC 3-Phase (+/- 10%)
50Hz
32A max
3W
6mA DC residual current protection (RDC-DD in accordance with EN
62955
230V AC sensing (4.0kV isolated)
868 MHz / 915 MHz (-A units) proprietary protocol for wireless sensor
and remote monitoring options
100A max. primary current, 16mm max. cable diameter
Rear / Bottom / Left side / Right side
439 x 282 x 122mm
IP65 (weatherproof)
ASA 6 & 3mm (UL 94 flame retardant) colours: white RAL 9016 and grey
RAL 9006
-25°C to +40°C
In-line vertical mounting holes
Single Phase Untethered: 3.0kg
Single Phase Tethered: 5.5kg
Three Phase Untethered: 3.3kg
Three Phase Tethered: 7.2kg
Advertisement
Table of Contents
