Table of Contents
Advertisement
12.1 Activating Smart Boost
1.
When charging in ECO or ECO+ mode, press
2.
The SMART BOOST icon will show including the target time and
the pre-set energy amount.
zappi
3.
will then test the EV for a few seconds, to determine the
maximum charge rate.
4.
The boost will start at the latest possible time to achieve the set energy amount, if the current charge
session has already accumulated enough energy, the boost will not be required and so will not operate.
The required energy and target time can be altered only when Smart Boost is not active. These settings are
in the Charge Settings/Smart Boost menu option.
12.2 Cancelling Boost
The boost can be cancelled by pressing
12.3 Programming the Smart Boost Values
1.
From the main screen, press
2.
Select Smart Boost from within the Charge Settings menu. The SMART BOOST screen is then shown
The boost can now be edited: Use
3.
(kWh) that is required
Use
the to move to the next value, and the
4.
Smart Boost parameters have been set
until SMART BOOST is shown.
until Cancel Boost is shown.
to enter Main Menu
or
buttons to edit the target time and amount of charge
to return to the main screen once the required
Advertisement
Table of Contents
