Status Screens - zappi -2H07UW-G User Manual

9. Charge Mode
10. Charge
Delivered to EV
11. Current
Charging Power
12. Green Level of
Last Charge
9.4

Status Screens

9.4.1
EV Disconnected
9.4.2
Waiting for Surplus
9.4.3
Surplus
9.4.4
Waiting for EV
Shows the selected Charging Mode; FAST, ECO or ECO+ (see Charging
Modes)
The accumulated charge energy that has been sent to EV in this charge
session.
When the EV is charging, arrows will show here along with the charging
power in kW.
This is the percentage of 'Green' energy for the last charge session, this
is shown at the end of a charge or when the EV is unplugged.
The EV is not connected to zappi.
In this example the last charging session delivered 20.8kWh of
energy to the EV and 80% of that energy came from the solar
panels.
zappi is waiting for sufficient surplus power from the
microgeneration system. This screen will be shown in ECO+
mode as it is only in this mode that charging will stop if there is
not enough surplus power.
The house in the centre is straight-faced as grid electricity is
being used by the house (0.9kW in the example shown).
Enough surplus is available and zappi is about to charge the EV.
A timer is decremented and can be set in the charge settings
(ECO+ mode only).
zappi is waiting for the EV to respond; the EV is not ready to
accept charge.