Table of Contents
Advertisement
20. myenergi app
The myenergi app allows you to control and monitor your myenergi devices, in real-time, from anywhere in
the world.
20.1 Setting Priorities
If you have multiple myenergi devices you can control how energy is distributed to
each of them in your app and it couldn't be simpler.
Using your finger, simply select the device you want to move and drag it to the
priority position you want it to take.
The higher up towards the house icon, the higher the priority for surplus energy. The
lower down and further away from the house icon the lesser the priority for surplus
energy.
If you have a myenergi eddi and/or zappi, regardless of the settings you have
selected, libbi can only provide energy to the zappi and/or eddi if they are above
them in priority.
i.e. Anything below the house icon receives surplus energy in the order of priority, going downwards. Going
upwards libbi will only provide energy to anything shown above it in priority.
Screen 1, above, shows eddi as the highest priority and libbi as the lowest priority. So, eddi will receive any
surplus energy first, followed by zappi and lastly followed by libbi. As libbi is below both zappi and eddi, libbi
can supply energy to them both (depending on the settings you have selected for your zappi and eddi devices).
Screen 2, eddi has been dragged to the bottom which means eddi I now the lowest priority to receive surplus
energy. libbi has been moved to the 'same' priority as zappi. Because they are the same priority they will both
receive surplus energy equally but because libbi is above zappi, libbi cannot provide energy to zappi.
Page 27 of 41
Advertisement
Table of Contents
