Table of Contents
Advertisement
9.2
RGB Indicator Key
The lighting flash indicator on the front of the
Pink:
Green:
White:
Yellow:
Blue:
Red:
These colours can be adjusted on Display & Sound menu (firmware version 2.163 onwards).
The colour effect (pulsing of the LED brightness) varies according to the charging power.
9.3
Display
1.
Import / Export
Power
2.
House Load
Power
3.
Status Text
4.
Generation
Power
5.
Lock Icon
6.
Date & Time
7.
Mode Icons
8.
zappi Icon
Connected
Charging 100% Green
Charging from Grid only
Charging mix of grid/green energy
Charge complete
Error
The power being either imported or exported from or to the grid (kW).
The direction of the arrows indicates if the property is currently
importing power (left) or exporting power (right).
The size of the arrows is proportionate to the level of power being
imported / exported, When the property is neither importing or
exporting power the figure will be 0.0kW and there will no animated
arrows. The property is then said to be 'in balance'.
The power that the property is currently using in kW. (Note: This is
displayed only when the Generation Sensor is installed directly to a CT
input or a
or other
harvi
The current status is displayed here (see Status Screens)
The power being generated at this time in kW. (Note: This is displayed
only when the CTs are installed either hard wired to the CT inputs of the
or wirelessly to a
zappi
Operation lock is active.
The current date and time.
These icons indicate that the import limiting is active (house), Demand
Side Response (~) or the eSense input is live (e)
If you see wavy lines above the zappi icon, the unit is thermally limiting!
The output power is temporarily reduced.
zappi
indicates the status of the charge. The default colours are:
device)
myenergi
or other
harvi
device)
myenergi
Advertisement
Table of Contents
