JVC LT-32C485 Instruction Manual page 29

3. Press the buttons to select the following options, and
then press buttons to select the options.
Tuning Mode Selects tune type: DTV ONLY / ATV
ONLY / DTV + ATV.
Country Selects the desired country.
Sorting by LCN Sets LCN On or Off. If you want to sort
(Logical Channel the channels.
Number, DTV)
4. Press the button to select Auto Tuning and then press the OK
button to start auto tuning.
5. Channel tuning will commence. This operation may take up to few
minutes. The display will show the progress of the tuning and the
number of channels found.
6. If you select DTV + ATV and you want to skip the DTV tuning during
scanning, press the MENU button to interrupt the tuning half way. You
will then go straight to ATV tuning. You may repeat the above step if you
want to skip ATV tuning.
7. After tuning is complete, the channels are arranged in a preset order. If
you wish to skip channels, modify the preset order or rename channels,
select Channel Edit under the channel menu (refer to page 31 for
details).
Customising TV Settings
Channel Tuning
Tuning Mode
DTV ONLY
DTV + ATV ATV ONLY
Country
UK
Sorting by LCN
On
Auto Tuning
Move Adjust
OK Select EXIT Exit
(Tuning Mode: DTV and
DTV+ATV)
Channel Tuning
Tuning Mode
DTV ONLY
Country
UK
Sorting by LCN
On
Auto Tuning
Move Adjust
OK Select EXIT Exit
(Tuning Mode: DTV and
DTV+ATV)
Channel Tuning
ATV :
DTV :
Radio :
Data :
5 % UHF
MENU Skip
5
Channel Tuning
Tuning Mode
ATV ONLY
DTV + ATV DTV ONLY
Country
UK
Auto Tuning
Move Adjust
OK Select EXIT Exit
(Tuning Mode: ATV)
Channel Tuning
Tuning Mode
ATV ONLY
Country
UK
Auto Tuning
Move Adjust
OK Select EXIT Exit
(Tuning Mode: ATV)
0 Channel(s)
0 Channel(s)
0 Channel(s)
0 Channel(s)
CH 22 DTV
EXIT Exit
29