Table of Contents
Advertisement
3
Connections
Connecting to Network
Connects your TV to the internet router by an
Ethernet cable. It allows access to some IP channels
that are available on T2 products. These are accessible
through the normal EPG / channel list. It can also
allow access to Red button plus services on some TVs.
Wired a Network Connection
Use an LAN or Ethernet cable (CAT5 or better with
RJ45 connector) to connect the TV's LAN socket to the
corresponding port on your router.
• This unit cannot be connected to a standalone modem directly. A router or a modem incorporated with a router has to be
used.
• When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the
LAN cable but unplug while pressing down on the lock.
• Do not connect a modular phone cable to the LAN socket.
• Since there are various connection configurations, please follow the specifications and instructions of your
telecommunication carrier, Internet service provider, and router setting guidebook.
Connecting Headphones
Connect your headphones to the TV's
Before putting on the headphones, turn the volume
down then put the headphones on and slowly
increase the volume until you reach a comfortable
listening level.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using headphones, especially for
extended periods.
20
WAN
socket.
HDMI3
Rear Right Bottom View of TV
LAN
PC
PC AUDIO IN
Ethernet Cable
(not included)
1
2
3
4
Internet
Rear Right Side View of TV
Digital Audio Output
RF
(Optical)
SCART
HDMI1(ARC)
HDMI2
COMMON INTERFACE (CI)
USB
AV
YPbPr
Earphones Cable
(not included)
Advertisement
Table of Contents
