Table of Contents
Advertisement
Chapter
5
Customising TV Settings
5
Picture Setting
Allows you to set your preferred picture mode.
1. Press the MENU button to display the main menu. Press the
buttons to select the PICTURE menu and then press the OK button.
2. Press the
buttons to select the following options, and then press the
buttons to adjust each option's setting or the OK button to select
the options.
Picture Mode
Select among picture mode: Standard / Movie / Personal / Dynamic.
Contrast
Adjusts the difference between light and dark levels in the picture. (for Personal mode)
Brightness
Increases or decreases the amount of white in the picture. (for Personal mode)
Colour
Controls the colour intensity. (for Personal mode)
Tint (for NTSC
Adjusts the balance between red, blue and green levels.
format)
(Tint is only available for NTSC signal input via the SCART or AV IN.)
Sharpness
Adjusts the level of crispness in the edges between light and dark areas of the picture. (for Personal
mode)
Backlight
Adjusts the backlight setting of your TV. This controls the brightness and display performance of the
screen.
Increasing the backlight setting will increase the brightness and display performance of
the screen. The higher the setting is, the higher the power consumption. You can select
from 1-10 to strike a balance between the picture brightness / display performance / power
consumption. Reducing the backlight setting will help you reduce power consumption and
thus save money by reducing electricity bills.
Colour Temp
Select among colour temperature: Normal / Warm / Cold.
SOUND
CHANNEL
PICTURE
TIME
LOCK
SETTINGS
PICTURE
Picture Mode
Standard
Dynamic
Movie
Contrast
50
Brightness
50
Colour
50
Sharpness
50
Move
Adjust
OK
Select
EXIT
Exit
SOURCES
SYSTEM
25
Advertisement
Table of Contents
