Table of Contents
Advertisement
14. Raise the Right Base Cover (93) and connect
the coaxial cable from your wall (or device) to
the Upright Coaxial Cable (115).
Press the Right Base Cover (93) and the Left
Base Cover (not shown) onto the Uprights (97)
until they snap into place.
15. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 40).
14
93
97
17
115
Advertisement
Table of Contents
